Preventing Pollution at Your Auto Repair Facilities - Part 01, Aqueous Parts Cleaners: Chapter 06: Waste Management
Chapter Abstract: Part 1 of 6 for this series, clip 6 of 8 for this part. Aqueous parts cleaning can generate three types of waste that must be managed correctly, waste solution, used filters, and skimmed oil. This waste can be managed by an outside vendor or in-house to realize greater costs savings. Never dispose of waste solution down the sewer or oil / water separator. This can be a hazardous waste that is contaminated with metals. The waste must be tested, shipped off-site and disposed of accordingly. Used filters may also need to be managed as hazardous waste. Oil collected from oil skimmers should be treated as used motor oil and recycled.
Author: California Department of Toxic Substances Control - Office of Pollution Prevention
Publication Date: 2003
You should have Internet access of 56kps or better and RealOnePlayer V2 Gold, which is available as a free download.
To download an .avi file of this clip, right click here and click Save Target As...
|Chapter 01: Introduction to the Series|
|Chapter 02: Microbial Sink-Top Units|
|Chapter 03: Immersion Units|
|Chapter 04: Spray Cabinets|
|Chapter 05: Ultrasonic Units|
|Chapter 06: Waste Management|
|Chapter 07: Case Study|
|Chapter 08: Review|
Partially funded by:
Nebraska Department of Environmental Quality, NDEQ